You could always use: switchport trunk allowed vlan 2-4094, or specify exactly the vlans you want passing over the trunk, eg.
interface GigabitEthernet0/14 switchport trunk encapsulation dot1q switchport mode trunk switchport trunk allowed vlan 2,10,200-300 ! Allan On Sun, Jan 18, 2009 at 8:16 AM, Hitesh Vinzoda <[email protected]>wrote: > Dear All > > Is there a way to supress vlan 1 from passing from a trunk link coz i m not > able to shutdown the L2 vlan 1. > > > Regards > > Ronnie > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
