[email protected] wrote: > i need to use the AUX port on a Cisco 876, but there ist > only a Combined AUX/CON Port. we need to use PAD on the AUX > Port and need to know how the router decides what is active > console or aux ???
You need to set 'modem enable' on line con 0 then configure line aux 0. http://www.cisco.com/en/US/docs/routers/access/800/850/software/configur ation/guide/dialbkup.html#wp1015415 I don't know whether PAD is supported on the AUX port of the 870 series but the above should provide a starting point. Personally I find it annoying that Cisco didn't just put both console & aux ports on these routers... configuring the console port as an aux port makes on-site management and configuration (when the modem needs to be unplugged) a right pain in the arse. Regards, Brad _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
