Thank you, to Engel, Jose, Elmar, as well as to all of those who wrote to me off-list!
I've gotten the information that I need (which is that 512 MB is plenty for a VXR, NPE-G1, at least for now, at least for how I plan to use them). I also thank all of you for the little bits and pieces of additional knowledge that I got from your replies, much of it not even related to my question. -Mick On Wed, Jan 21, 2009 at 5:12 PM, Engelhard Labiro <[email protected]>wrote: > Hi Mick, > > FYI a 7206VXR-NPE-G1 loaded with 1Gig only consumes around 250Mb of > its memory for a full BGP table (around 271K routes without > filtering). See our router stat here > > xxxx#sh mem > Head Total(b) Used(b) Free(b) Lowest(b) > Largest(b) > Processor 63F362C0 923573340 256034056 667539284 651316116 > 369925212 > I/O C000000 67108864 3721756 63387108 62399392 > 62399356 > Transient 7B000000 16777216 11320 16765896 14820880 > 16759876 > [....truncated...] > > hope this gives you a clue if 512Mb will be able to handle full BGP table. > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
