Paul, If this is related to the OIR (online insertion and removal) of the MSFC or MSFC version 2, I would tread softly wearing a static strap during the seating of these blades. This can occur when static discharge, or other anomalies, i.e., solar flare ups, cosmic radiation, totally, :-) damages ASICS or DIMMS on the blade. Secondly, parity mem in DIMM form factors, are available for MSFC2, if you are using these in your hardware, hence, the %SYSTEM_CONTROLLER-SP-STDBY-3-ERROR: Error condition detected: TM_DATA_PARITY_ERROR messaging....this is available in iterations above 128MB, which are limited only to the MSFCv1. If you want a more detailed output for issues regarding DIMMS or processes, use SH DIAG or SH PROCESSES. Moreover, you may need to replace the MSFC, I'd monitor the syslog to determine if this is recurrent. It will confirm if it is a hardware or board-level issue. So in a word, I'd replace the blade.
Jay Murphy IP Network Specialist NM Department of Health ITSD - IP Network Operations Santa Fe, New Mexico 87502 Bus. Ph.: 505.827.2851 "We move the information that moves your world." -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Paul Stewart Sent: Thursday, January 22, 2009 10:47 AM To: Subject: [c-nsp] sup720 errors - parity Anyone come across these before? Someone had mentioned to me bad memory? Jan 22 12:42:46: %SYSTEM_CONTROLLER-SP-STDBY-3-ERROR: Error condition detected: TM_DATA_PARITY_ERROR Jan 22 12:42:46: %SYSTEM_CONTROLLER-SP-STDBY-3-EXCESSIVE_RESET: System Controller is getting reset so frequently Cisco IOS Software, c7600s72033_rp Software (c7600s72033_rp-ADVENTERPRISEK9-M), Version 12.2(33)SRC, RELEASE SOFTWARE (fc3) Tried Cisco.com and the explanations I can find is very vague... Thanks, Paul _______________________________________________ cisco-nsp mailing list https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ ______________________________________________________________________ This inbound email has been scanned by the MessageLabs Email Security System. ______________________________________________________________________ Confidentiality Notice: This e-mail, including all attachments is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited unless specifically provided under the New Mexico Inspection of Public Records Act. If you are not the intended recipient, please contact the sender and destroy all copies of this message. -- This email has been scanned by the Sybari - Antigen Email System. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
