Just like you said, use snmp views and combinations of the included/excluded keywords,
depending on how specific you want to be.
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094489.shtml#setupsnmp
--
Tassos
shariq qamar wrote on 24/01/2009 00:29:
Hi guys ,
as we know that our snmp agents or servers uses to query routers oids which
is a sequence of integers that uniquely identifies a managed object by
defining a path to that object through a tree-like structure in MIB .
My question is
Is it possible can we make multiple MIBS and tag oids in individual MIBS
so we can control a SNMP server agent query to a router
by filtering the oids in paticular MIB table .
I m not sure about the actual command but got some idea from cisco
documentation and available commands
on router ...
RTR(config)#snmp-server view INFOVISTA MIB1 included
RTR(config)#snmp-server view TE-SERVER MIB2 included
etc
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
