Our Pix 515 has been spontaneously rebooting for the past week or so. I
don't believe it's power related, as the Pix is plugged into one of our big
UPSes. I started monitoring the console interface today and found the
following message whenever the Pix goes to reboot:
Nested traceback attempted via watchdog.
Traceback output aborted.
Does this sound like a hardware issue or a hack attempt?
After researching it, I found some suggestions, one being heat. I wouldn't
think it is heat related as my office (where the Pix is located) was showing
about 73 degrees at the thermostat. I've put a fan blowing into the cabinet
where the Pix is located, hopefully if the issue is heat related, that'll
fix it.
Thanks,
John Aldrich
IT Manager,
Blueridge Carpet
706-276-2001, Ext. 2233
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
