Enno Rey wrote:
> Hi,
>
> can you post the configs of the 4507's interfaces facing the ME3400s?
> Assuming all those are running sth like "l2prot point lacp"... do you see
> errdisables due to l2tpguard?
>
>From memory, as I can't reach the Lab setup from here ...
[..]
int gig6/3
channel-group 3 mode active
channel-protocol lacp
l2protocol-tunnel cdp
l2protocol-tunnel stp
l2protocol-tunnel vtp
switchport mode trunk
[..]
Same for gig7/3 ... 4507 side was fine and didn't show any errors ... I
can try to re-enable l2p-t Monday and see whether I can get more infos
though ... but I couldn't seem to get more details from the ME3400 port ...
Tnx, -garry
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
