Hi Gergely,
Yes, I have the set this.

I did not before (several weeks ago), and was not seeing any traffic in the policy-map.
I changed it and can now see traffic in the map :-
nbg01-agg-switch-01#sh policy-map interface vlan 666


 Vlan666

  Service-policy input: 2MegPolice

    class-map: class-default (match-any)
      Match: any
      police :
        2096000 bps 13000 limit 13000 extended limit
      Earl in slot 5 :
        82564118403 bytes
        5 minute offered rate 102792 bps
        aggregate-forwarded 82564118403 bytes action: transmit
        exceeded 0 bytes action: transmit
        aggregate-forward 9008 bps exceed 0 bps

  Service-policy output: 2MegPolice

    class-map: class-default (match-any)
      Match: any
      police :
        2096000 bps 13000 limit 13000 extended limit
      Earl in slot 5 :
        7733193350 bytes
        5 minute offered rate 11896 bps
        aggregate-forwarded 7733193350 bytes action: transmit
        exceeded 0 bytes action: transmit
        aggregate-forward 4568 bps exceed 0 bps



On 02/02/2009 10:50, Gergely Antal wrote:
did you set qos to vlan based?

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/qos.html#wp1726124

Ian MacKinnon wrote:
Hi All,

I am having an issue with policers on a 6500 not actually doing any
policing.  Running 12.2(33)SXH

I have config like :-
interface Vlan666
   ip address 10.10.10.1 255.255.255.252
   no ip redirects
   logging ip access-list cache out
   service-policy input 2MegPolice
   service-policy output 2MegPolice

policy-map 2MegPolice
    class class-default
     police 2097000 13000    conform-action transmit     exceed-action
transmit     violate-action drop

So I want to allow a burst and then drop the violate.

A show policy-map interface does not show any exceed or violates.

In mrtg I can see that more than 2Meg is being passed, even as much as
40M, and I can see the traffic in the destination graphs as well.

Anybody got this working, or seen issues like this?

Thanks
Ian


--

This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the sender. Any
offers or quotation of service are subject to formal specification.
Errors and omissions excepted.  Please note that any views or opinions
presented in this email are solely those of the author and do not
necessarily represent those of Lumison and nPlusOne.
Finally, the recipient should check this email and any attachments for the
presence of viruses.  Lumison and nPlusOne accept no liability for any
damage caused by any virus transmitted by this email.

_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/



--
Ian MacKinnon
Lumison
t: 0845 1199 900
d: 0131 514 4055
P.S. Do you love Lumison?

p.s. Looking for remote access?
Chat to our team about our award winning broadband and VoIP solutions
for remote and home working, or visit www.lumison.net




--

This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the sender. Any
offers or quotation of service are subject to formal specification.
Errors and omissions excepted.  Please note that any views or opinions
presented in this email are solely those of the author and do not
necessarily represent those of Lumison and nPlusOne.
Finally, the recipient should check this email and any attachments for the
presence of viruses.  Lumison and nPlusOne accept no liability for any
damage caused by any virus transmitted by this email.

_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to