I assume it's a L2 link (EoMPLS), so BFD won't help much. We're in the same situation, also stuck with UDLD timers and 2 parallel EoMPLS xconnects. I can't get the convergence lower then 20 seconds with the default UDLD, so I'm also hoping for fast UDLD
Best Regards, Thomas ________________________________________ Van: [email protected] [[email protected]] namens Gert Doering [[email protected]] Verzonden: dinsdag 3 februari 2009 8:15 Aan: David Hughes CC: Cisco NSP ((E-mail))' Onderwerp: Re: [c-nsp] Fast UDLD timers in SXI? Hi, On Tue, Feb 03, 2009 at 04:30:50PM +1000, David Hughes wrote: > Can someone verify if 12.2(33)SXI offers fast UDLD timers (i.e. down > to 1 second) or if we are still stuck with the old 7 sec timers. We > can do 1 sec UDLD on 2900 class switches so I hope we see it in the > "premier switching platform" some time soon. We need some way to pick > up a link failure at the far end of an EoMPLS xconnect in a reasonable > time. Can you use BFD? (Yes, this is not answering your question - I don't know the answer - but it might be an alternative approach if this a layer 3 link) gert -- USENET is *not* the non-clickable part of WWW! //www.muc.de/~gert/ Gert Doering - Munich, Germany [email protected] fax: +49-89-35655025 [email protected] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
