Mark Tinka wrote: > On Tuesday 03 February 2009 09:31:49 pm Steve Bertrand > wrote:
Thanks for the feedback Mark, > For customer aggregation edge routers, prefixes used to > assign /30 (/126 for v6, or whatever you use for this > purpose) point-to-point addresses, as well as assignments > for their own use on their LAN's, from your own blocks, > would be included in your iBGP running on these router. > Typically, we assign whole /24's or more for this purpose, > and announce a shorter block within our network; keeps our > iBGP table as small as possible (can't have little /30's or > /126's running around in your iBGP, now can you :-)). So far, I seem to be doing ok then, less the ability to aggregate the /30's. At first, I allocated space for /30's from a reserved space for only that purpose, and have this reserved space on both the inside, and outside of the edge routers (and have to have the little /30's floating around). That's easy enough to rectify at this point by renumbering my intra-router links, so thank you for pointing that out :) Steve _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
