Hi, On Tue, Feb 03, 2009 at 04:35:26PM -0500, Pierre Lamy wrote: > Can anyone confirm that hard coded speed/duplex settings on a generic > modern Cisco switch, will not prevent the switch port from sending fast > link pulses, advertising the switch port's hardcoded speed/duplex > settings so that the device at the other end, will be able to bring up a > link if the remote device itself does not send out FLP?
It will autoneg 100M, but it will usually result in a duplex mismatch.
"Don't hardcode ports unless you know for sure that you need it" (because
you connect to a Cisco 7200 with PA-FE or the like).
gert
--
USENET is *not* the non-clickable part of WWW!
//www.muc.de/~gert/
Gert Doering - Munich, Germany [email protected]
fax: +49-89-35655025 [email protected]
pgp3YCT7r6dfq.pgp
Description: PGP signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
