Sigurbjörn Birkir Lárusson wrote:
Something along these lines if you wanted to just send 10.10.53.0/24 and 10.10.54.0/24 through the VPN tunneltunnel-group testgroup general-attributes default-group-policy testpolicy group-policy testpolicy internal group-policy testpolicy attributes split-tunnel-policy tunnelspecified split-tunnel-network-list value TunnelList access-list TunnelList standard permit 10.10.53.0 255.255.255.0 access-list TunnelList standard permit 10.10.54.0 255.255.255.0 BR, Sibbi
This perfectly sets routes for specified networks. But how to disable default gateway setting on vpn client? If i go to ASA ASDM->Configuration->VPN->Default Tunnel Gateway it says: To configure default tunnel gateway, go to Static Route. i have two static routes configured: S aaa.bbb.ccc.ddd 255.255.255.255 [1/0] via 10.10.1.2, inside S* 0.0.0.0 0.0.0.0 [1/0] via 10.10.4.254, outside _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
