Hi, Take a look here: http://www.cisco.com/en/US/products/hw/routers/ps368/module_installation _and_configuration_guides_chapter09186a0080440138.html#wp1135748
Then, using ES20 for Ethernet with EVC, you have the option to bridge-domain a QinQ VLAN to the same global SVI. I have never tested it, and am not sure if it's a common application, but I think this should work. Arie -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of MKS Sent: Wednesday, February 04, 2009 00:21 To: [email protected] Subject: [c-nsp] Ethernet to ATM local connect Hi there Is there a cisco platform / sw out there that can the following (the critical part being _second-dot1q_) interface gig3/1.10 encapsulation dot1q 10 second-dot1q 2 interface atm2/0/0 pvc 0/400 l2transport encapsulation aal5 connect atm-ethvlan atm2/0/0 0/400 gigabitethernet3/1.10 interworking ethernet http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fslocal.html#wp1 096615 Regards MKS _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
