and what is the default distance of OSPF?
yes its 110, so you need to make the floating route have a distance
higher than that!
So, all working now.
On 04/02/2009 11:37, Ian MacKinnon wrote:
Hi All,
I think my brain is misfiring today.
I am trying to provide some backup services between to gateway
routers, on one router I just have a simple route statetment, and on
the second router I have the same route with a metric on the end :-
router 1
ip route 10.0.0.0 255.255.255.0 10.1.0.0.1
router 2
ip route 10.0.0.0 255.255.255.0 10.2.0.01 666
ie router1 sends it via its connection, and router 2 is available when
the link from router 1 goes away
This is then redistributed into ospf on both router, both routers then
have the same neighbour upstream
redistribute static metric-type 1 subnets
However when I look upstream I am not seeing the metric, and it is
choosing the router 2 route
What am I missing?
Thanks
Ian
--
This email and any files transmitted with it are confidential and
intended
solely for the use of the individual or entity to whom they are
addressed.
If you have received this email in error please notify the sender. Any
offers or quotation of service are subject to formal specification.
Errors and omissions excepted. Please note that any views or opinions
presented in this email are solely those of the author and do not
necessarily represent those of Lumison and nPlusOne.
Finally, the recipient should check this email and any attachments for
the
presence of viruses. Lumison and nPlusOne accept no liability for any
damage caused by any virus transmitted by this email.
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
--
Ian MacKinnon
Lumison
t: 0845 1199 900
d: 0131 514 4055
P.S. Do you love Lumison?
p.s. Looking for remote access?
Chat to our team about our award winning broadband and VoIP solutions
for remote and home working, or visit www.lumison.net
--
This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the sender. Any
offers or quotation of service are subject to formal specification.
Errors and omissions excepted. Please note that any views or opinions
presented in this email are solely those of the author and do not
necessarily represent those of Lumison and nPlusOne.
Finally, the recipient should check this email and any attachments for the
presence of viruses. Lumison and nPlusOne accept no liability for any
damage caused by any virus transmitted by this email.
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
