There's another problem: ATM AAL5 over MPLS and ATM Cell Relay over MPLS are not supported with the PA-A1, the only ATM interface supported by Dynamips.
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/atom25s.html#wp1068980 Regards, Antonio Soares, CCIE #18473 (R&S) [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Wayne Lee Sent: quarta-feira, 4 de Fevereiro de 2009 21:11 To: [email protected] Subject: Re: [c-nsp] AToM Lab Problem On Wed, Feb 4, 2009 at 8:51 PM, Ibrahim Abo Zaid <[email protected]> wrote: > Hi All > > I was labbing AToM scenario and uses IOS 12.2(33)SRC for ATM AAL5 and > ATM Cell-relay feature but i can't get dynamips run for this image , > it always results "*** Error: 209-unable to start VM instance " error > messages > > any body lab this feature using different image or know how to fix > this error message ? > > complete image name > c7200p-spservicesk9-mz.122-33.SRC3_3.bin > > > best regards > --Ibrahim > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > I used the following in my .net file to get a p image to work [localhost:7201] workingdir = /tmp udp = 10100 [[7200]] image = /home/dynamips/c7200-spserv.image ghostios = True # sparsemem = True npe = npe-g2 Wayne _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
