Simon Lockhart wrote:
On Mon Feb 09, 2009 at 10:27:25AM -0700, Clinton Work wrote:
a) Set both POS interfaces to "clock source internal" because there is
no network clock in a back to back configuration.
Surely if you're connecting back to back you want "clock source internal" on
one end, and "clock source network" on the other end - otherwise you've got
two free running clocks which might be in sync, or might not...
Au contraire. Each side of the POS path is separate, so both as 'clock
source internal' is best.
http://www.cisco.com/en/US/tech/tk482/tk607/technologies_tech_note09186a0080094bb9.shtml
pt
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
