Paul, The best option for using local VLAN significance is to use the more advanced ES20 modules on the 7600: http://www.cisco.com/en/US/prod/collateral/routers/ps368/product_data_sh eet0900aecd8057f3ad.html
Another thing you can take a look at is VLAN Translation: http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/gu ide/vlans.html#wp1044990 Arie -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Paul Stewart Sent: Friday, February 13, 2009 21:22 To: 'Cisco-nsp' Subject: [c-nsp] 7600 SVI + Subinterface Question Hi folks... I believe the answer is no but worth asking... we have a large VLAN database on some 6500's with VTP running. On one of these 7600's we have many SVI interfaces which in turn are trunked on GigE's to other layer2 switches... We have a client coming onboard that we need to possibly send about 60 layer3 connections over a GigE trunk connection but the requested VLAN numbers are mostly already in use on the 7600. Without getting into other options can I do the following?? Interface vlan 300 Descr test test Ip address 10.10.10.1 255.255.255.248 Interface GigE9/1 Switchport mode trunk Switchport trunk allowed vlan 300 Interface GigE9/8.300 Descr Another customer IP address 192.168.0.1 255.255.255.240 I realize this gets mapped to internal VLAN's but in this case will those VLAN's co-exist or conflict? Thanks, Paul _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
