it may be that your flash is corrupt, is missing a ios image, etc... My rommon memory is a bit fuzy atm, but you should be able to do a "dir flash:" or "dir /all" and see what images are there. Then do a "boot <imagename>"
---- Matthew Huff | One Manhattanville Rd OTA Management LLC | Purchase, NY 10577 http://www.ox.com | Phone: 914-460-4039 aim: matthewbhuff | Fax: 914-460-4139 > -----Original Message----- > From: [email protected] [mailto:cisco-nsp- > [email protected]] On Behalf Of chloe K > Sent: Friday, February 20, 2009 4:00 PM > To: Antonio Soares; [email protected] > Subject: Re: [c-nsp] need help about switch cisco 4 9 4 8 > > Thank you > > Now I change it to 0x2102 > but it can't boot properly > > Can you help? > > Thank you > > ******** The system will autoboot now ******** > > config-register = 0x2102 > Autobooting using BOOT variable specified file..... > Could not find a valid file in BOOT environment variable. > BOOT variable can be set from IOS. To find currently set > Rom Monitor variables, please type 'set' command. > For help on choosing a boot method, type 'confreg' command. > > Antonio Soares <[email protected]> wrote: > There are IOS releases that do not support the Management Interface. > I know that 12.2.46SG supports it. So compare your 4948's and > check the IOS releases. > > You need a config-register=0x2101. With 0x2142, the switch won't load > the startup config and needs a "boot system flash" statement > to load the IOS image. > > > Regards, > > Antonio Soares, CCIE #18473 (R&S) > [email protected] > > -----Original Message----- > From: [email protected] [mailto:cisco-nsp- > [email protected]] On Behalf Of chloe K > Sent: sexta-feira, 20 de Fevereiro de 2009 19:08 > To: [email protected] > Subject: [c-nsp] need help about switch cisco 4 9 4 8 > > Hi > > I have problems in this switch 49 48 > > 1/ I can't setup the management interface. > I have another same modeul. I can see there is Fasthernet to set it up > as management port. > > 2/ After reload, I lost configuration. I did copy run start > It said that it can't find the Valid boot environment > > config-register = 0x2142 > Autobooting using BOOT variable specified file..... > Could not find a valid file in BOOT environment variable. > rommon 1 > > > Please help > > > > > --------------------------------- > > > Yahoo! Canada Toolbar : Search from anywhere on the web and bookmark > your favourite sites. Download it now! > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > > > > --------------------------------- > > > Yahoo! Canada Toolbar : Search from anywhere on the web > and bookmark your favourite sites. Download it now! > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
