Yes, you can do the prefix-list. Schilling
On Thu, Feb 26, 2009 at 12:32 PM, <[email protected]> wrote: > Hello, > > I'm trying to accomplish redistribution between two OSPF processes (100 > and 175) using a route-map with an access-list on an ASA 8.0. > > Can't seem to get it working. Does anyone know if this is possible or if > I have something messed up with the access-list (doesn't look like I can > do a prefix-list on the route-map in ASA)? See below: > > Router OSPF 100 > redistribute OSPF 175 metric-type 1 subnets tag 10457 route-map > OSPF175-OSPF100-RMAP > > route-map OSPF175-OSPF100-RMAP permit 10 > match ip address OSPF175-OSPF100-ACL > > access-list OSPF175-OSPF100-ACL remark Used for redistribution > access-list OSPF175-OSPF100-ACL standard permit host x.y.z.0 > access-list OSPF175-OSPF100-ACL standard permit host 0.0.0.0 > > Any help is greatly appreciated. > > Thank you, > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
