On 28/02/2009, at 12:15 AM, Jason Lixfeld wrote:
I need to know whether or not a switch port from a 6500/7600 or ME6500 (or any other switch series that does EoMPLS) that is configured for EoMPLS (xconnect <vc> <IP>) still transmits STP BPDUs while the EoMPLS tunnel is up (or down for that matter).
On Cat6k you can only configure EoMPLS xconnects on a layer 3 interface, not a switch port.. Any BPDUs you get are from the other end of the VC.
Thanks David ... _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
