Justin Shore wrote:
Brandon Price wrote:
Actually, you can install a C7200-I/O-GE+E and save yourself a PA
slot and the associated bandwidth point hit.
http://www.gossamer-threads.com/lists/cisco/bba/101247
Now that's something that I did not know. Any word on if this is
actually supported or not?
Justin
* From the NPE G1 datasheet: http://tinyurl.com/2hlzhg*
"Although a Cisco 7200VXR chassis with an NPE-G1 does not require the
use of an I/O controller, an I/O controller can still be used. The
NPE-G1 is supported with the following Cisco 7200 Series I/O controller
part numbers: C7200-I/O, C7200-I/O-2FE/E, C7200-I/O-GE+E."
Brandon
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
