On Wed Mar 4 13:21 , "Leslie Meade" sent: >I am trying to bridge my 2821 to one ip to give me redundancy. >I am using this config to bridge the two ints and I see gig0/1 up and the bvi >up but I am not able to ping it > >The original config gig0/1 had the ip of 10.1.1.6 and I could ping everything >and get to everything >Ios C2800NM-IPVOICEK9-M > >Any ideas ? > > >bridge irb >! >interface gig0/0.100 >encapsulation dot1Q 100 >bridge-group 100 >! >interface gig0/1.100 >encapsulation dot1Q 100 >bridge-group 100 >! >interface BVI100 >ip address 10.1.1.6 255.255.255.0 >no shutdown >! >bridge 100 protocol ieee >bridge 100 route ip
Do you have a default route configured? If you are pinging from a remote subnet you'll need a default route. -chris _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
