Hi all, I have installed a 16 mb flash card into an LS1010. From the 'sh ver', the card is shown/recognized, but I get a trackback error:
Cisco Internetwork Operating System Software IOS (tm) LS1010 WA4-5 Software (LS1010-WP-M), Version 12.0(10), RELEASE SOFTWARE (fc1) Copyright (c) 1986-2000 by cisco Systems, Inc. Compiled Wed 22-Mar-00 08:39 by phanguye Image text-base: 0x60010930, data-base: 0x60696000 ROM: System Bootstrap, Version 11.2(1.4.WA3.0) [integ 1.4.WA3.0], RELEASE SOFTWARE RegIV_1010 uptime is 14 minutes System restarted by reload Running default software cisco LS1010 (R4600) processor with 65536K bytes of memory. R4700 processor, Implementation 33, Revision 1.0 Last reset from power-on 1 Ethernet/IEEE 802.3 interface(s) 10 ATM network interface(s) 123K bytes of non-volatile configuration memory. 16384K bytes of Flash PCMCIA card at slot 0 (Sector size 128K). 8192K bytes of Flash internal SIMM (Sector size 256K). --More-- *Mar 6 18:49:26.159: %SYS-3-CPUHOG: Task ran for 4804 msec (50/0), process = Exec, PC = 600A8E90. -Traceback= 600A8E98 60038260 6003895C 60038374 60038118 6003895C 60038374 60057794 6004BAFC 600569F4 6009701Configuration register is 0x2102 I can't format the card either: IV_1010#format slot0: Format operation may take a while. Continue? [confirm] Format operation will destroy all data in "slot0:". Continue? [confirm] %Error formatting slot0: (Error reading for erase check) RegIV_1010# *Mar 6 18:52:31.111: %SYS-3-CPUHOG: Task ran for 4844 msec (43/0), process = Exec, PC = 600A8E90. -Traceback= 600A8E98 60038260 6003895C 60038374 600CAEF4 6004BAFC 600569F4 6009701C 60097008 Any idea on what's going on? Thanks.... /bs _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
