I'm guessing you want the fixed ifindex for snmp polling purposes. If that is the case try the aal5 cisco mib where you can poll based on vc data. Note that it seems to not work well if you have persistent indexes in use , at least on 12.2SB.
Brian -----Original Message----- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Jay Hennigan Sent: martedì 10 marzo 2009 0.15 To: cisco-nsp@puck.nether.net Subject: [c-nsp] snmp-server ifindex persist - store data on flash/disk? We have a number of 7206VXR boxes terminating ATM ADSL aggregation circuits. With a large number of interfaces, the persistent index table is too large for NVRAM and the interface IDs change on reboot just as if the command weren't specified. Is there a workaround or command to store the persistent data on the flash disk which has plenty of room? -- Jay Hennigan - CCIE #7880 - Network Engineering - j...@impulse.net Impulse Internet Service - http://www.impulse.net/ Your local telephone and internet company - 805 884-6323 - WB6RDV _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/