hi manaf one quick "hack" would be: run 2 different ospf processes and do redistribute between them. unfortunately you're then seeing all the routes as ospf external..
-steven -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Manaf Al Oqlah Sent: Tuesday, March 10, 2009 8:42 AM To: [email protected] Subject: [c-nsp] OSPF Default Route Hi, Is there any way to advertise default route in OSPF with a specific metric to an interface and another metric to another interface. For example, I want to advertise default route (default-information originate) for neighbor connected to gigabit 1/0 with metric 10 and for neighbor connected to gigabit 1/1 with metric 20. Thank you _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
