We installed SXI Advanced Enterprise in one of our catalyst 6500 with sup720-3BXL, and the box is having persistent high CPU over 90%/80% where we have normal cpu utilization around 30%. I played with RP SPAN on our SXF11 before, it's good to see what is punted to CPU according to the following Doc,
SPAN RP-Inband and SP-Inband A SPAN for the RP or SP port in Cisco IOS Software is available in Cisco IOS Software Release 12.1(19)E and later. http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a00804916e0.shtml But the feature is not in the current SXI even the configuration guide has that feature documented. http://cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/span.html#wp1089465 test(config)#monitor session 1 ? destination SPAN destination interface or VLAN filter SPAN filter VLAN source SPAN source interface, VLAN test(config)#monitor session 1 source ? interface SPAN source interface intrusion-detection-module SPAN source intrusion-detection-module remote SPAN source Remote vlan SPAN source VLAN test#remote login switch Trying Switch ... Entering CONSOLE for Switch Type "^C^C^C" to end this session test-sp#monitor ? elog Event-logging control commands event-trace Control event tracing test-sp#test monitor ? crash test crash Schilling _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
