Hey all ,
im using MRTG for monitoring our network devices traffic.
i faced a problem of how to draw PPPoA sessions as it dont have an OID like
PPPoE
we have a router with 2 PPP customers : PPPoA and PPPoE
the OID for the PPPoE sessions can be found easily : 1.3.6.1.4.1.9.9.194.1.1.1
to find the number of PPPoA sessions , we used CISCO-AAA-SESSION-MIB
casnActiveTableEntries "1.3.6.1.4.1.9.9.150.1.1.1"
but that will give all the active sessions on the router , when i used the
snmpwalk command on a linux server it gave me over 6000 , while its on the
router via show user summary command , gives around 1800
so the needed configuration was as below:
create on-demand command under the PVC range , under the ATM sub interface
(This will reserve the active connections only)
interface ATM1/0/0.11 multipoint
range pvc 11/35 11/274
create on-demand
as well as , applying the command aaa session-mib populate start in global
configuration mode
after all , show user summary output:
Device#sh users summary
1766 session(s) locally terminated
PPPOA 1007
PPPOE 759
[r...@cacti-nms ~]# snmpwalk -v2c -c community IP .1.3.6.1.4.1.9.9.150.1.1.1
SNMPv2-SMI::enterprises.9.9.150.1.1.1.0 = Gauge32: 1766
Then to draw the PPPoA sessions , u have to substract the PPPoE sessions as the
OID gives the total number of sessions:
Target[Device_PPPoA]:1.3.6.1.4.1.9.9.150.1.1.1.0&1.3.6.1.4.1.9.9.150.1.1.1.0:commun...@ip
- 1.3.6.1.4.1.9.9.194.1.1.1.0&1.3.6.1.4.1.9.9.194.1.1.1.0:commun...@ip
Thanks all
Best Regards,
Mohammad Khalil
What can you do with the new Windows Live? Find out
See all the ways you can stay connected to friends and family
Get news, entertainment and everything you care about at Live.com. Check it out!
_________________________________________________________________
Drag n’ drop—Get easy photo sharing with Windows Live™ Photos.
http://www.microsoft.com/windows/windowslive/products/photos.aspx
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
