Hi Tseveen,
Vpdn-group for pppoe is the "old" way. You are probably looking for:
bba-group pppoe <some_name||global>
virtual-template 1
!
interface GigabitEthernet 0/0
pppoe enable group <same_name>
!
interface Virtual-Template 1
...
!
Christoph
On Mar 22, 2009, at 9:06 AM, Tseveendorj wrote:
Hello,
I'm trying to do PPPoE on c3825 router but I faced VPDN related
problem. c3825-ipvoicek9-mz.124-11.T4 IOS has only 2 (PPTP, L2TP)
options in protocol.
vpdn-group 1
accept-dialin *
* protocol pptp* *
virtual-template 1
I want look like follow.
vpdn-group 1
accept-dialin
**protocol pppoe **
virtual-template 1
The IOS version is c3825-ipvoicek9-mz.124-11.T4 of c3825.
Which IOS version supported *protocol pppoe* command ?
Look forward hearing from you.
Best regards,
Tseveen.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
--
CHRISTOPH LOIBL ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
mailto:[email protected] |No trees were killed in the creation of this message.
http://www.sil.at |However, many electrons were terrible inconvenienced.
CL8-RIPE ++++++++++++++++++++++++++++++++++++ PGP-Key-ID: 0x4B2C0055 +++
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
