Hi, This depends whether you want to do QoS based on tos bit or source / destination ip... if it is based on tos bit, u do not need to do anything and if it is based on S/S ip use QoS-pre classify command..
Regards, Message: 2 Date: Wed, 25 Mar 2009 08:11:20 -0400 From: "Jeff Cartier" <jcart...@acs.on.ca> Subject: [c-nsp] QoS on Tunnel Interfaces w/ DSL To: <cisco-nsp@puck.nether.net> Message-ID: <bcd3e762f1767c42a5226bbacde49bfbce7...@loki.acs.local> Content-Type: text/plain; charset="us-ascii" Greetings All, I was wondering if anyone had any examples of how to impose QoS on a Site that would be doing IPSec VPN tunnels to another site via a standard DSL feed. I'm curious to see if best-practice is to place the policy-shaping on the interface tunnel and/or the Internet interface. Thanks! _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/