Hi,
does anybody know the reason why I can configure a 9180 byte MTU on port
0 and 1 on a GSR 3-port Gigabit Ethernet port (3GE-GBIC-SC) but only
4470 byte on the third port. I use IOS 12.0(32)S12 and 12.0(31)S6.
12012-lab(config-if)#exit
12012-lab(config)#int Gig 2/0
12012-lab(config-if)#mtu ?
<1500-9180> MTU size in bytes
12012-lab(config-if)#exit
12012-lab(config)#int Gig 2/1
12012-lab(config-if)#mtu ?
<1500-9180> MTU size in bytes
12012-lab(config-if)#int Gig 2/2
12012-lab(config-if)#mtu ?
<1500-4470> MTU size in bytes
Thanks,
Jan
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
