Hi
I have migrated an Ethernet customer connected from our 7206 (PE) to our
new 7609 (PE) and I am now seeing some very strange SNMP interface results from
the 7600. The graph itself looks very spikey and when for example a BGP change
takes place the is a trough of about 20Mbps, then a peak of about 20Mbps, then
a trough of about 20Mbps then back to normal.
The customer is only using about 60Mbps so its very obvious
Its almost as if SNMP is being low prioritised whilst other process i.e. BGP do
their work. This is affecting us as the customer who monitors their own network
is asking why our graphs look so different whereas before when they were
connected to the VXR, they matched almost perfectly
My concern is that SNMP is not working as well as it should be which in turn
will alter our results for 95 percentile customers etc
Has anyone else ever experienced this?
Regards
Mark
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
