Has anyone ever successfully terminated a group of bonded DS1s from an
Overture device such as an ISG 140 back to a PA-MC-2T3-EC? Talking to
Overture's support they're saying that even though they use MLPPP they
also require the use of BCP (Bridge Control Protocol) which I personally
hadn't heard of until today. They're saying that I need to be able to
pass 1Q tagged frames down the MLPPP bundle to the ISG on the remote
end. The SE they have onsite here has a document that shows an example
config but it apparently requires IP routing to be disabled (no ip
routing). That's not cool. That kind of defeats the purpose of buying
a shiny new router if you have to turn off routing...
So has anyone ever bridged DS1s between a Cisco and Overture box? Why
would routing have to be disabled for BCP to work?
Thanks
Justin
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
