Dear Friends!
I have a setup in which DSL users connect to a LNS via L2TP. Everything is working fine, however on LNS I am not receiving any MAC address for the DSL Users( Type PPPoVPDN). This is my standard crucial requirement for generating several reports for management purposes. Can someone tell me if it is possible to get Mac-address for the VPDN users??? I am getting mac-address for PPPoE type users which are terminated on my BRAS. Attach is the debug output for both LNS and BRAS which shows that mac-address field is missing in LNS output. ######### LNS output (domain stripping is used) ########## Apr 6 04:29:47.020: RADIUS(00001037): Send Access-Request to 10.10.10.10:3312 id 1645/44, len 123 Apr 6 04:29:47.020: RADIUS: Framed-Protocol [7] 6 PPP [1] Apr 6 04:29:47.020: RADIUS: User-Name [1] 11 "testuser7" Apr 6 04:29:47.020: RADIUS: User-Password [2] 18 * Apr 6 04:29:47.020: RADIUS: NAS-Port [5] 6 370 Apr 6 04:29:47.020: RADIUS: NAS-Port-Id [87] 17 "Uniq-Sess-ID370" Apr 6 04:29:47.020: RADIUS: Connect-Info [77] 9 "1920000" Apr 6 04:29:47.020: RADIUS: NAS-Port-Type [61] 6 Virtual [5] Apr 6 04:29:47.020: RADIUS: Service-Type [6] 6 Framed [2] Apr 6 04:29:47.020: RADIUS: NAS-IP-Address [4] 6 1.1.1.1 Apr 6 04:29:47.020: RADIUS: Acct-Session-Id [44] 18 "CAA36E5A00001058" Apr 6 04:29:47.308: RADIUS: Received from id 1645/44 10.10.10.10:3312, Access-Accept, len 37 Apr 6 04:29:47.308: RADIUS: Class [25] 5 Apr 6 04:29:47.308: RADIUS: 50 49 4E [PIN] Apr 6 04:29:47.308: RADIUS: Service-Type [6] 6 Framed [2] Apr 6 04:29:47.308: RADIUS: Framed-Protocol [7] 6 PPP [1] Apr 6 04:31:47.100: RADIUS(00001038): Received from id 1645/45 Apr 6 04:31:47.100: VT[Vi3.1]:Request took 0 msec, 0 msec processing time Apr 6 04:31:47.100: uid:371 Tnl/Sn 58894/504 L2TP: Virtual interface created for testus...@best-dsl bandwidth 1920 Kbps Apr 6 04:31:47.100: Vi3.1 Tnl/Sn 58894/504 L2TP: Virtual interface created for testus...@best-dsl, bandwidth 1920 Kbps Apr 6 04:31:47.100: Vi3.1 Tnl/Sn 58894/504 L2TP: VPDN session up Apr 6 04:31:47.220: RADIUS/ENCODE(00001038):Orig. component type = VPDN Cisco-3845-L2TP-LNS#show users Interface User Mode Idle Peer Address Vi3.1 testus...@best-ds PPPoVPDN - 1.1.1.233 ######### BRAS output ########## *Mar 1 00:13:15.367: RADIUS(00000009): Send Access-Request to 10.10.10.10:3312 id 1645/6, len 167 *Mar 1 00:13:15.367: RADIUS: Vendor, Cisco [26] 41 *Mar 1 00:13:15.367: RADIUS: Cisco AVpair [1] 35 "client-mac-address=000f.a392.4bef" *Mar 1 00:13:15.367: RADIUS: Framed-Protocol [7] 6 PPP [1] *Mar 1 00:13:15.367: RADIUS: User-Name [1] 11 "testuser6" *Mar 1 00:13:15.367: RADIUS: User-Password [2] 18 * *Mar 1 00:13:15.367: RADIUS: NAS-Port-Type [61] 6 Virtual [5] *Mar 1 00:13:15.367: RADIUS: Vendor, Cisco [26] 18 *Mar 1 00:13:15.367: RADIUS: cisco-nas-port [2] 12 "3/0/0/0.36" *Mar 1 00:13:15.367: RADIUS: NAS-Port [5] 6 805306404 *Mar 1 00:13:15.367: RADIUS: Service-Type [6] 6 Framed [2] *Mar 1 00:13:15.371: RADIUS: NAS-IP-Address [4] 6 1.1.1.1 *Mar 1 00:13:15.371: RADIUS: Acct-Session-Id [44] 29 "3/0/0/0.36_CAA3693A0000000E" *Mar 1 00:13:15.519: RADIUS: Received from id 1645/6 10.10.10.10:3312, Access-Accept, len 37 *Mar 1 00:13:15.519: RADIUS: Class [25] 5 *Mar 1 00:13:15.519: RADIUS: 50 49 4E [PIN] *Mar 1 00:13:15.519: RADIUS: Service-Type [6] 6 Framed [2] *Mar 1 00:13:15.519: RADIUS: Framed-Protocol [7] 6 PPP [1] *Mar 1 00:13:15.523: RADIUS(00000009): Received from id 1645/6 *Mar 1 00:13:15.643: RADIUS/ENCODE(00000009):Orig. component type = PPoE Cisc-3640-BRAS-And-L2TP-LAC# show user Interface User Mode Idle Peer Address Vi2.1 testuser6 PPPoE 00:03:25 2.2.2.244 Best Regards, Asad Ul-Islam _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
