It might be supported but you don't get 10GB with it. Aaron
On Mon, Apr 6, 2009 at 21:12, Stephen Fulton <[email protected]> wrote: > According to the SIP/SPA compatibility matrix: > > > http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/76intro.html#wp1131939 > > The SPA-1X10GE-L-V2 is compatible with SIP-400. > > As always, verify with your Cisco SE. > > -- Stephen > > > MKS wrote: > >> Hi There >> >> According to cisco SIP-400 can >> "Ability to run 4 GE line rate for 64-byte packets, and OC-48 line >> rate for 48-byte packets for POS, HDLC, etc. with select services" >> >> https://www.cisco.com/en/US/prod/collateral/routers/ps368/product_data_sheet0900aecd8027c9e6.html >> >> Can someone please clarify what exactly this means. >> >> Also if I put a 10GbE SPA into a SIP-400 what is the expected >> performance of that? >> >> Thanks >> //MKS >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
