Hi,
The Cisco introduced PfR can support OSPF as parent route on IOS
12.4(24)T and this term is PIRO(Protocol Independent Route
Optimization).
Detail link this:
http://www.cisco.com/en/US/docs/ios/oer/configuration/guide/oer-trf_rte_ctl.html#wp1060987
But when I use 12.4(24)T in Cisco 1812 module, I didn't see any PIRO
information can support OSPF when I type 'sh oer master prefix', like
below...
#sh oer master prefix
192.168.1.2/32 DEFAULT* 92 172.17.11.254 Tu11 U
U U 0 0 0 0
N N N N 1 1
#sh ip route ospf
O 192.168.1.0/24 [110/11] via 10.0.0.1, 02:46:06, Tunnel11
[110/11] via 10.1.1.1, 02:46:06, Tunnel12
Before 12.4(24)T, I use static route as parent route and it works
well. But I really want to use OSPF as PfR parent route because static
route would make route fail when gateway couldn't arrive.
Anyone have idea about this ?
Thanks and Regards,
Pigsign
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
