Hi, I am testing rpr-plus and could see links up in less then 1 sec but ping resume only after 47 sec.... I understand with rpr-plus we get more then 30 sec of ping drop, still when all links are up and adj is up, why there is a ping drop?
6500.LAB-sdby> Standby console disabled 6500.LAB-sdby> *Apr 14 05:03:28.909 UTC: %PFREDUN-SP-STDBY-6-ACTIVE: Initializing as ACTIVE processor *Apr 14 05:03:29.121 UTC: %SYS-SP-STDBY-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output. *Apr 14 05:03:31.873 UTC: %TDP-5-INFO: default: TDP ID removed *Apr 14 05:03:31.988 UTC: %C6KPWR-SP-4-PSOK: power supply 1 turned on. *Apr 14 05:03:31.996 UTC: %C6KPWR-SP-4-PSOK: power supply 2 turned on. *Apr 14 05:03:32.276 UTC: %FABRIC-SP-5-FABRIC_MODULE_ACTIVE: The Switch Fabric Module in slot 5 became active. *Apr 14 05:03:33.799 UTC: %OIR-SP-6-INSCARD: Card inserted in slot 5, interfaces are now online 00:00:01: BaseBoard Index:156 00:00:02: DaughterBoard Index:208 (Centralized Forwarding Card) 00:00:02: Gemini Rev#: 3 Firmware compiled 18-Oct-07 14:48 by integ Build [100] 00:00:04: %SYS-CFC1-5-RESTART: System restarted -- Cisco Internetwork Operating System Software IOS (tm) c6lc2 Software (c6lc2-SP-M), Version 12.2(18)SXF12a, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by cisco Systems, Inc. Compiled Thu 10-Jan-08 23:53 by kellythw *Nov 30 00:00:02.167: *CFC1: Currently running ROMMON from S (Gold) region* Apr 14 05:03:40.783 UTC: %DIAG-SP-6-RUN_COMPLETE: Module 1: Running Complete Diagnostics... Apr 14 05:03:42.179 UTC: %DIAG-SP-6-DIAG_OK: Module 1: Passed Online Diagnostics Apr 14 05:03:44.548 UTC: %OIR-SP-6-INSCARD: Card inserted in slot 1, interfaces are now online Apr 14 05:03:47.469 UTC: %DTP-SP-5-TRUNKPORTON: Port Gi1/1 has become dot1q trunk Apr 14 05:03:47.985 UTC: %DTP-SP-5-TRUNKPORTON: Port Gi1/3 has become dot1q trunk Apr 14 05:03:50.631 UTC: %DTP-SP-5-TRUNKPORTON: Port Gi1/18 has become isl trunk *Apr 14 05:03:57.157 UTC: %STANDBY-6-STATECHANGE: Vlan100 Group 1 state Listen -> Active 6500.LAB> 6500.LAB>en Password: 6500.LAB# *Apr 14 05:04:14.981 UTC: %CLNS-5-ADJCHANGE: ISIS: Adjacency to 0100.7409.0004 (GigabitEthernet1/23) Up, new adjacency *Apr 14 05:04:15.065 UTC: %CLNS-5-ADJCHANGE: ISIS: Adjacency to 0100.7409.0002 (GigabitEthernet1/24) Up, new adjacency *Apr 14 05:04:21.969 UTC: %LDP-5-NBRCHG: LDP Neighbor 10.74.90.4:0 is UP *Apr 14 05:04:22.529 UTC: %LDP-5-NBRCHG: LDP Neighbor 10.74.90.2:0 is UP *Apr 14 05:04:23.321 UTC: %BGP-5-ADJCHANGE: neighbor 10.74.90.4 Up *Apr 14 05:04:25.049 UTC: %BGP-5-ADJCHANGE: neighbor 10.74.90.2 Up *Apr 14 05:04:45.369 UTC: %STANDBY-6-STATECHANGE: Vlan1503 Group 10 state Standby -> Active Apr 14 05:06:21.515 UTC: %PFREDUN-SP-6-ACTIVE: Standby initializing for RPR-PLUS mode Apr 14 05:06:21.711 UTC: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output. Apr 14 05:06:23.464 UTC: %PFINIT-SP-5-CONFIG_SYNC: Sync'ing the startup configuration to the standby Router. 6500.LAB# Regards, _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
