Hi all! I've been racking my brain over this for a day now.
I have a multicast stream that I have marked with a DSCP value close at the core of my net. I subscribe too it in an ME3400-24FS (12.2(46)SE METROIPACCESS). The problem is that the switch, contrary too documentation, has no "mls qos" commands. Neither global nor interface commands. I haven't found any reference too this "change" anywhere. So, how do I get it too trust the DSCP values it on the uplink port so I can reserve bandwidth for it on the outgoing port. Best regards Mattias Gyllenvarg _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
