Hi,
has anyone had any experience replacing a broken pin on a backplane of a
Catalyst 6500 chassis? I've been banging my head against a brick wall
trying to obtain a pin replacement/insertion tool from Molex, so was
wondering if anyone had seen this/done this repair themselves.
Allegedly, client says it was already bent when the chassis was
delivered... ahem.
thanks in advance.
LB
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
