Hi Pshem, Thanks for your reply.
Having the same NAS-IP-Address in both rules is not a typo. In the first rule, we are saying 'If the NAS IP Address is NOT equal to 213.130.147.56 then apply the following rule' In the second rule, we are saying 'If the NAS IP Address IS equal to 213.130.147.56 then apply the following rule' Based on this information, do you have any further suggestions and are you able to supply example configs of your own setup? Thanks Steven Steven McCrory Senior Network Engineer Netservices PLC Waters Edge Business Park Modwen Road Manchester, M5 3EZ www.netservicesplc.com -----Original Message----- From: Pshem Kowalczyk [mailto:[email protected]] Sent: 24 April 2009 00:41 To: Steve McCrory Cc: [email protected] Subject: Re: [c-nsp] Problems with multiple VPDN hops Hi, {cut} > > What I'd like to know is if it's possible to use radius to essentially > switch packets from one L2TP tunnel into another when they reach LNS2. > > > > We know that the VPDN and Radius configuration are correct on LNS2 > because we can successfully terminate sessions on this router and assign > IP addresses > We have a very similar setup with multiple 7301 as the devices in the middle. Works like a charm. In your radius config above I've noticed that you use the same NAS-IP-Address twice - is that a typo? kind regards Pshem -------- NetServices plc, Company No. 4178393, Registered Office: NetServices House, 31 Modwen Road, Waters Edge Business Park, SALFORD, M5 3EZ -------- _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
