Hi,
you should try Class Based Weighted Fair Queuing (CBWFQ),
<javascript:openLargePopup('/ITDIT/CFN/Dispatch?act=featdesc&task=display&featureId=410','FeatureWin',300,400)>
This ist what you are looking for.
Regards
thomas
We have several customers coming in on Ethernet. They are connected
to L2 switch and trunked into a 7500 router via VLAN. This has worked
fine so far with the use of rate-limit on the sub-interface. Most
customers have 5~10mbps.
However, we are increasingly needing QoS so VoIP traffic does not drop
when data traffic bursts. Only work around I know how to do is to
give separate rate-limit based on IP address since most of the time
VoIP has separate gateway on the customer side than the data firewall.
Classification of the traffic is not a problem. The issue is, how do
you give VoIP traffic priority over data traffic on a Ethernet
sub-interface?
Is there a good way to implement this on a 7500? If not, what Cisco
hardware will work? We are on a tight budget and the number of
clients are small. (dozen or so) Would going with L3 switch be
better? If so, what model?
Thanks!
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
