Hi folks.
I posted about this before and was told it was either bad memory or bad sup cards.. Have a pair of 7606's with sup720-3bxl . these errors occur on one system and not the other. To top it off, we got these same errors showing up a couple of times now on 6509 with sup2/msfc2 recently.. May 9 07:16:21: %SYSTEM_CONTROLLER-SP-STDBY-3-ERROR: Error condition detected: TM_DATA_PARITY_ERROR May 9 07:16:21: %SYSTEM_CONTROLLER-SP-STDBY-3-EXCESSIVE_RESET: System Controller is getting reset so frequently Both 7606 chassis are running 12.2(33)SRA7 and this also occurred when they were running SXF train. We have many 6500's and only one of them so far has exhibited the same errors and it is running 12.2(18)SXF16 Just looking for thoughts. we swapped spare supervisors between the 7600 showing issues and the one that doesn't log any errors, kicked it over and still see these issues.. Bad chassis?? Are these errors critical in nature or more just informative? Thanks for your time, Paul _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
