Hi, We use ASR 1004 for internet peering. I've noticed that despite the fact that the device should have 4G of RAM (2G for each IOS), it only reports about 750M:
cisco ASR1004 (RP1) processor with 750908K/6147K bytes of memory. 10 Gigabit Ethernet interfaces 1 Ten Gigabit Ethernet interface 32768K bytes of non-volatile configuration memory. 4194304K bytes of physical memory. Why is there such a huge difference? Other thing that I've noticed - after bringing first full feed the free memory dropped by almost 300M, after bringing two more peers we're down another 200M, even though the BGP summary doesn't reflect that: BGP router identifier 172.16.31.212, local AS number axaz BGP table version is 1499020, main routing table version 1499020 319336 network entries using 45345712 bytes of memory 1754099 path entries using 119278732 bytes of memory 521347/50531 BGP path/bestpath attribute entries using 39622372 bytes of memory 12 BGP rrinfo entries using 288 bytes of memory 105606 BGP AS-PATH entries using 2952666 bytes of memory 5844 BGP community entries using 579940 bytes of memory 18 BGP extended community entries using 608 bytes of memory 0 BGP route-map cache entries using 0 bytes of memory 0 BGP filter-list cache entries using 0 bytes of memory BGP using 207780318 total bytes of memory 853191 received paths for inbound soft reconfiguration BGP activity 451647/132207 prefixes, 2813379/1059265 paths, scan interval 15 secs And the last thing - there seem to be a lot of memory allocated to the SBC process: (sh processes memory sorted) Processor Pool Total: 768844520 Used: 666617736 Free: 102226784 lsmpi_io Pool Total: 6295088 Used: 6294116 Free: 972 PID TTY Allocated Freed Holding Getbufs Retbufs Process 247 0 524286824 156132532 372840416 0 0 BGP Router 0 0 157038032 10062300 127440824 0 0 *Init* 339 0 74528188 548 74698500 0 0 SBC main process 160 0 91102924 1746296 74647640 0 0 IP RIB Update 221 0 7073896 320908 7097036 0 0 BGP Scanner 90 0 4017044 39640 2498096 0 0 CWAN OIR Handler 52 0 2309192 2832 1977032 0 0 IOSD ipc task 1 0 540036 3104 554072 0 0 Chunk Manager 0 0 0 0 462436 0 0 *MallocLite* 27 0 802824 2464 436260 0 0 IPC Seat Control 0 0 1425513440 1426114596 375724 7275888 0 *Dead* 18 0 299268 0 321720 113400 0 EEM ED Syslog How can i claim that memory back? kind regards Pshem _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
