Hi,
tried that but I need to modify the composite metric within eigrp, that
is why I use the offset-list, because I have the same loopback from a
different vlan with the same composite metric, here is the result:
br01.headend.cluj#sh ip route 172.30.255.54
Routing entry for 172.30.255.54/32
Known via "eigrp ZZZZ", distance 80, metric 130816, type internal
Redistributing via eigrp ZZZZ
Last update from X.X.X.X on Vlan2764, 00:00:24 ago
Routing Descriptor Blocks:
X.X.X.X, from X.X.X.X, 00:00:24 ago, via Vlan2764
Route metric is 130816, traffic share count is 1
Total delay is 5010 microseconds, minimum bandwidth is 1000000 Kbit
Reliability 255/255, minimum MTU 1500 bytes
Loading 14/255, Hops 1
* Y.Y.Y.Y, from Y.Y.Y.Y, 00:00:24 ago, via Vlan2864
Route metric is 130816, traffic share count is 1
Total delay is 5010 microseconds, minimum bandwidth is 1000000 Kbit
Reliability 255/255, minimum MTU 1500 bytes
Loading 24/255, Hops 1
distribute-list route-map test-eigrp in Vlan2764
sh route-map test-eigrp
route-map test-eigrp, permit, sequence 10
Match clauses:
ip address (access-lists): permit-any
Set clauses:
metric -1
Policy routing matches: 0 packets, 0 bytes
Standard IP access list permit-any
10 permit any (3110 matches)
Ramcharan, Vijay A wrote:
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of luismi
Sent: May 13, 2009 09:59
To: Dan Sabau
Cc: [email protected]
Subject: Re: [c-nsp] 7600 eigrp offset-list problem
Same IOS here, similar code...
We use under address-family...
offset-list 0 out 25 Port-channel1.xxx
We will take a look to the config after a reboot.
We didn't reboot the router yet.
Do you know if it is a well know bug?
Did you open a SR to ask for a reason for this behaviour?
El mié, 13-05-2009 a las 14:23 +0300, Dan Sabau escribió:
Hi,
we have the following problem, if a router reboots when it comes online
the part of the config with the offset-list within router eigrp is
ignored, you have to do something like:
conf t
router eigrp X
no offset-list permit-any in 128257 Vlan2764
offset-list permit-any in 128257 Vlan2764
Does any body know how to fix it?
The ios is: 12.2(33)SRC1 we have tried SRBx and the problem was there too.
10x
Interesting problem. Labbed it up with available hw (1700 and 7206). 1700 runs 12.4.17.
Offset list seemd to work after reboot of the 1700 (where the offset list was applied). I can only assume that you have a platform/code version issue.
Did you try using a route-map to achieve the same functionality?
Is the behavior the same?
i.e.
router eigrp <num>
distribute-list <etc>
route-map <name>
match ip address <acl>
set metric +/- <num>
--
Dan Sabau
Manager WAN
New Com Telecomunicatii SA,
Telefon: 0755049817
Email: [email protected]
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
