Hello, I have an 827 router that seems to have noise issue's after a while and i'm wondering if it is the device or the line? The noise margin drops down after a week or two of use. If I restart the router the noise margin is back up to about 7 dB.
This is what is looks like after a week or two: ATU-R (DS) ATU-C (US) Modem Status: Showtime (DMTDSL_SHOWTIME) DSL Mode: ITU G.992.1 (G.DMT) ITU STD NUM: 0x01 0x01 Vendor ID: 'ALCB' 'ANDV' Vendor Specific: 0x0000 0x0000 Vendor Country: 0x00 0x00 Capacity Used: 96% 104% Noise Margin: -41.5 dB 11.0 dB Output Power: 20.0 dBm 12.0 dBm Attenuation: 32.5 dB 18.0 dB Defect Status: LOM None Last Fail Code: Protocol error Selftest Result: 0x49 Subfunction: 0x02 Interrupts: 661 (1 spurious) Activations: 2 SW Version: 3.8129 FW Version: 0x1A0 Dan. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
