Thanks Peter That seems it will work but it is applied globally for all VLAN , is there any way to apply it per-VLAN ?
best regards --Ibrahim On Sat, May 16, 2009 at 2:24 PM, Peter Rathlev <[email protected]> wrote: > On Sat, 2009-05-16 at 13:12 +0300, Ibrahim Abo Zaid wrote: > > I have a strange situation and i think it is normal but i need a solution > > for it > > > > I have 2 MLS and VLAN x is created on both and there is L2 etherchannel > > between both and it allows all VLANs , when all access ports in VLAN x in > > any MLS got down > > SVI is always up although all access ports are down and that is normal > due > > to trunk ports always all VLANs . > > > > so is there any command to bind SVI status to access ports status only so > > when access port got down , SVI got down also ? > > You can use "switchport autostate exclude" on the trunk port. > > > http://www.cisco.com/en/US/docs/ios/interface/command/reference/ir_s7.html#wp1012922 > > > Regards, > Peter > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
