Multihoming is not always about redundancy, and the most likely point
of failure is not always your own router. It is often something much
more expensive, like your power.
On May 13, 2009, at 4:06 PM, Robert Maier wrote:
but if you are using Multihoming, only one router is single point of
failure.
So in the most cases you would use 2 routers with HSRP to the LAN side
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
