GNS is meant for router simulations, not switch simulations. Although,
you can do some stuff with the 3600 series with 16ESW cards. Last time
I checked there were some issues testing with spanning tree.
Holemans Wim wrote:
Just found out through google, will give it a try tomorrow.
Thanks,
Wim Holemans
________________________________
From: Michal Prazenka [mailto:[email protected]]
Sent: maandag 18 mei 2009 19:35
To: Holemans Wim
Cc: [email protected]
Subject: Re: [c-nsp] network simulator
Have you tried GNS3?
Michal
Holemans Wim wrote / napísal(a):
I'm looking for a (free) network simulator that allows me to simulate a
small network (20 switches) with different vlans on it. I want to test
different scenario's : what happens if this switch goes down or that
link goes down, how do the packets flow in each scenario for the
different vlans...
Anyone has a good reference to such a product ? Free would be nice but
is no absolute condition.
Thanks,
Wim Holemans
Netwerkdienst Universiteit Antwerpen
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
