You need to apply the marking ingress policy on the "interface vlan". Even if it's a L2 only VLAN, you can do "interface vlan", but do not have to configure an IP address.
This is documented here: http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/con figuration/guide/qos.html#wp1726124 Arie -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Swati Sharma Sent: Tuesday, May 19, 2009 09:01 To: [email protected] Subject: [c-nsp] mls qos vlan based Hi, I am trying to prioritize traffic from certain vlan and send it to port-chanel. When I do this, it says MQC not supported on channel interfaces. What is the other way to achieve the same. I want to prioritize any traffic from (say) vlan 10 / 20. Regards, Swati _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
