Hi Chris,
Just out of interest, what model routers are you intending to use to achieve
this? Also, are you aiming to load balance between the two peers?
James Greig
----- Original Message -----
From: "ChrisSerafin" <[email protected]>
To: <[email protected]>
Sent: Tuesday, May 19, 2009 7:00 PM
Subject: [c-nsp] 'Simple' BGP multi homing
I have 2 ISPs connecting at my data center at the moment, both with simple
basic static routes, and I would like to multi-home them to provide
redundancy in the event one goes down.
I have created a simple diagram here: http://chrisserafin.com/WAN-BGP.jpg
I have a few assumptions, so let me know if I'm on the correct page:
* I will need to get both routers setup for BGP peering to their ISPs
* I will need to request/buy a new IP block and AS from ARIN that
both routers will advertise
I'm hoping I can 'lab this up' if both routers have spare (gig/fa)ethernet
ports...sound possible?
Thanks
--chris
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
