Hello, Anyone can give me more information about docsis 3.0 channel bonding?
At this moment i can´t synchronize my wideband cable modem ... i´ve got always offline status... I use for my *primary* *downstream channel* , the cmts 520 and one of downstreams of the Edge QAM... I use a DTI server, Arris Edge QAM,cisco uBR10K for this scenario Follow the sample of my config : controller Modular-Cable 1/0/0 ip-address 192.168.251.2 modular-host subslot 6/1 rf-channel 0 cable downstream channel-id 24 rf-channel 0 frequency 633000000 annex B modulation 256qam interleave 32 rf-channel 0 ip-address 192.168.251.1 mac-address 0000.cafe.1ad5 depi-remote-id 49162 rf-channel 1 cable downstream channel-id 25 rf-channel 1 frequency 639000000 annex B modulation 256qam interleave 32 rf-channel 1 ip-address 192.168.251.1 mac-address 0000.cafe.1ad5 depi-remote-id 49163 rf-channel 2 cable downstream channel-id 26 rf-channel 2 frequency 645000000 annex B modulation 256qam interleave 32 rf-channel 2 ip-address 192.168.251.1 mac-address 0000.cafe.1ad5 depi-remote-id 49164 interface Wideband-Cable1/0/0:0 no ip address cable bundle 1 cable bonding-group-id 1 cable dynamic-bw-sharing cable rf-channel 0 bandwidth-percent 50 cable rf-channel 1 cable rf-channel 2 interface Modular-Cable1/0/0:0 no ip address cable bundle 1 cable dynamic-bw-sharing cable rf-bandwidth-percent 10 interface Cable6/1/1 no ip address downstream Modular-Cable 1/0/0 rf-channel 0 upstream 0 no cable packet-cache cable max-hosts 16 cable insertion-interval 100 cable bundle 1 cable downstream channel-id 149 cable downstream annex B cable downstream modulation 256qam cable downstream interleave-depth 32 cable downstream frequency 621000000 no cable downstream rf-shutdown cable downstream rf-power 45 cable upstream max-ports 4 cable upstream 0 connector 4 cable upstream 0 frequency 33000000 cable upstream 0 docsis-mode tdma-atdma cable upstream 0 channel-width 3200000 3200000 cable upstream 0 minislot-size 2 cable upstream 0 range-backoff 3 6 cable upstream 0 modulation-profile 121 no cable upstream 0 shutdown cable fiber-node 1 downstream Modular-Cable 1/0/0 rf-channel 0-2 ! Anyone can help me with this task? Best regards _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
